Index of /downloads/tonga-demo/Release-20100830

[ICO]NameLast modifiedSizeDescription

[PARENTDIR]Parent Directory  -  
[TXT]Changes-U-Boot.txt2010-09-15 11:29 2.3K 
[   ]Developers Manual TongARM - V1 7_September-eng.pdf2010-09-08 16:00 4.8M 
[TXT]Readme.txt2010-09-15 16:45 1.0K 
[   ]defconfig2010-09-15 16:00 44K 
[DIR]demo-rootfs/2011-02-05 19:38 -  
[   ]linux-tmpa-2.6.34-100903.tar.bz22010-09-03 19:10 65M 
[   ]openocd-tonga.cfg2011-02-02 19:55 2.0K 
[TXT]releasenotes.txt2010-08-31 18:02 1.9K 
[   ]u-boot2010-09-03 12:47 876K 
[   ]u-boot-tmpa-100903.tar.bz22010-09-03 19:13 8.6M 
[   ]u-boot.bin2010-09-03 12:47 227K 
[   ]u-boot_nand_tonga2.bin2010-09-03 12:47 355K 
[   ]uImage2010-09-03 16:05 2.1M 
[   ]uImage-defconfig.gz2010-09-15 11:22 10K 
[   ]uImage-tonga2010-09-03 16:05 2.1M 

Readme.txt
	This file.

u-boot
	U-Boot ELF format. Suitable for downloading e.g. via JTAG
	(e.g. OpenOCD)

u-boot.bin
	U-Boot raw binary. Suitable for direct RAM execution,
	start address is 0x43f00000

u-boot_nand_tonga2.bin
	U-Boot image to be flashed into NAND flash starting from
	NAND address 0x00 (MTD partition "u-boot")

uImage
uImage-tonga (same as uImage, just for convenience)
	Kernel uImage - flash to "kernel" NAND partition

defconfig
uImage-defconfig.gz
	Kernel configuration of the above pre-compiled uImage - this is
	*not* the tonga defconfig contained in the kernel sourcecode

demo-rootfs/
	directory containing some rootfs-images for demo and test
	purposes, created with uTIB http://www.mucross.com
	can be flashed into "rootfs" MTD partition

openocd-tonga.cfg
	Sample config file for OpenOCD JTAG software using the
	FTDI based USB ARM JTAG interface

Developers Manual TongARM - V1 7_September-eng.pdf
	Full manual for using Linux especially on the Tonga2 platform