Readme.txt This file. u-boot U-Boot ELF format. Suitable for downloading e.g. via JTAG (e.g. OpenOCD) u-boot.bin U-Boot raw binary. Suitable for direct RAM execution, start address is 0x43f00000 u-boot_nand_tonga2.bin U-Boot image to be flashed into NAND flash starting from NAND address 0x00 (MTD partition "u-boot") uImage uImage-tonga (same as uImage, just for convenience) Kernel uImage - flash to "kernel" NAND partition defconfig uImage-defconfig.gz Kernel configuration of the above pre-compiled uImage - this is *not* the tonga defconfig contained in the kernel sourcecode demo-rootfs/ directory containing some rootfs-images for demo and test purposes, created with uTIB http://www.mucross.com can be flashed into "rootfs" MTD partition openocd-tonga.cfg Sample config file for OpenOCD JTAG software using the FTDI based USB ARM JTAG interface Developers Manual TongARM - V1 7_September-eng.pdf Full manual for using Linux especially on the Tonga2 platform